The Work Glove Built With a Second Layer
Double-dipped latex, so water has to get through twice before your hands ever feel it.
- Stays dry through a full shift, not just the first wash
- Double layer of fully dipped latex, not the usual single thin coat
- Sand-grip palm plus a touchscreen fingertip that still works your phone
- Brushed fleece lining and an extended cuff to lock out cold air
Why your last pair stopped working
Most insulated work gloves use one thin dip of rubber over the knit shell. It's fine on day one. Then a knuckle flexes, a seam rubs, or you wash them once, and that thin coat wears through. Once water gets past it, the liner underneath soaks it up like a sponge, and you're working with cold, wet hands inside a glove that's supposed to be waterproof.
Why this one works when the others didn't
Two full layers, not one
A double dip of latex instead of the usual single coat, so there's a second seal behind the first if it ever takes a hit.
Grip you can still feel
Sand grit in the palm bites into tools and hardware instead of sliding, and a graphene fingertip keeps your phone working.
Built to actually seal at the wrist
An extended cuff plus an adjustable wrist closure, so cold air and runoff can't sneak in while you're working.
Warm without the bulk
A brushed fleece lining and knit shell hold heat in without the stiff, bulky feel that kills fine motor work.
| What matters | ThermaGrip | Typical Insulated Glove | Cheap Hardware Pair |
|---|---|---|---|
| Waterproof coating | Double dip | Single dip | None or minimal |
| Grip while wet | Sand-grit palm | Smooth rubber | Fabric only |
| Touchscreen use | Graphene tip | Glove off first | Glove off first |
| Wrist seal | Extended cuff | Standard cuff | Short, loose |
| Price | $29.99 | $35 to $50 | $8 to $15, replaced every season |
How the double dip actually works
Think of it like a raincoat with a backup zipper. If the outer seal ever gets nicked on a sharp edge, there's a second full layer behind it instead of a direct path to your liner.
Double-dip latex shell
Two full coats of latex instead of one thin layer, so one worn spot doesn't mean a wet glove.
Sand-grit and graphene palm
Fine grit bites into tools and hardware so they don't slip, and a graphene patch lets your phone sense your finger right through the glove.
Fleece lining and extended cuff
Brushed fleece traps warm air near your skin, and a longer cuff with an adjustable wrist stops cold air from sneaking in while you work.
What the crew is saying
Had three pairs of "waterproof" gloves die on me this winter alone. These are the first ones still holding up after a month of actual job sites.
I can still thread a small bolt with these on, which is the first time I've said that about an insulated glove. Didn't expect that.
Not cheap but I was buying a new $12 pair every few weeks before. Done the math and this is already the better deal.
Full dexterity, not just warmth
Thread a bolt. Pick up a loose screw. Pull a fuel filter. The sand-grit palm and slim fit mean you're not stripping a glove off to actually do the job, cold hands or not.
Stays sealed, stays warm
The double-dip latex shell and extended cuff are built to take a full shift of snow, slush, and runoff without letting it reach the fleece lining underneath.
Sized to actually fit
Available from Medium up through XXL, so you're not stuck choosing between too tight to close and too loose to grip anything. Check the size chart before you order.
Get Your ThermaGrip Gloves
$29.99 per pair. Pick your size and color at checkout.
- 1 pair of ThermaGrip insulated work gloves included
- Double-dip waterproof latex shell included
- 90-day money-back guarantee included
Questions before you order
I already bought an insulated glove like this and it stopped working. What's different here?
Most insulated gloves use a single thin dip of rubber. Once that wears through at a knuckle or a seam, the liner underneath soaks up water and stays wet. ThermaGrip uses a double layer of fully dipped latex instead, so there's a second seal behind the first.
Will these actually keep my hands warm, or just mild-cold warm?
They're built for the kind of cold most outdoor trade work actually happens in: wet, windy, well below freezing. For extreme sub-zero conditions held for hours, pair them with a liner glove underneath, the same way you would with any insulated work glove.
What if they don't fit my hands?
They're available from Medium through XXL. Check the size chart on this page before ordering, and if the fit is off once they arrive, our 90-day guarantee covers it.
Can I wash these or get them fully soaked without ruining the warmth?
They're built for the wet, snowy, splashy conditions of a real job, not for submerging for long stretches. If they do take on water, let the lining fully air dry before the next shift so the insulation stays effective.
Will these work for electrical, HVAC, or diesel work specifically?
They're built for dexterity and warmth across trades: threading small hardware, running a fuel filter, using a touchscreen without stripping a glove off. They are a cold-weather work glove, not an electrically rated safety glove, so don't substitute them for insulating gloves on live electrical work.
Why pay $29.99 when I can grab a cheap pair for $10?
A $10 pair usually means replacing it every few weeks once the coating wears through. One pair of these built to actually last the season tends to cost less than three or four cheap pairs by February.
How fast do these ship?
Orders are processed in 1 to 2 business days and typically arrive within 5 to 10 days after that, depending on your location.
What's your return policy?
You have 90 days from delivery to decide. If they're not working out, send them back for a refund.
More from the crew
Finally a pair that doesn't go cold and clammy by lunch.
Grip is no joke, dropped nothing all week.
Still works my phone screen without taking them off. Small thing, huge deal.
Wrist cuff actually keeps snow out. First glove that's managed that.
Ran these through a full snow day, dry the whole time.
Bought a size up from my usual and it fit perfectly with room to flex.
Stop replacing gloves every winter
Double-dipped latex, sand-grip palm, fleece lining. One pair built to actually last the season.